How To Get An Analogue Camera Signal From A Drone To A Laptop
Allow us identify. Let us set. Let Us Drone. If you've read office i of this three-part series, and then you lot're ready to bound into the camera view, which is where nosotros spend nigh 95% of our fourth dimension when out flying.
I recall how overwhelmed I was when I first saw how many icons in that location were on the camera view screen. In this post, we'll dive into what those icons mean and we'll take a look at every setting on the drone. I'll do my best to explain each setting why I take sure things prepare the style they are.
Parts 1, 2, and 3
Role i: In role one, nosotros talked about how to become the app initially setup, forth with a description of Skypixel, the equipment tab, "Me" tab, and the editor. You tin read part ane here.
Part 2:You lot are currently reading part 2 of 3. Part 2 takes a look at all of the drones settings and every icon on the camera view screen.
Part 3: Part three dives into the camera settings and how to become that perfect picture or video. You can read part iii here.
Note: I volition exist using a Phantom iv Advanced for this walkthrough. Some DJI drones have settings and options that others practice not. Go along that in mind when post-obit along every bit your GO 4 app may expect slightly unlike hither and there.
Getting ready to wing
Okay, now that we've gone through the basic setup of the app, we're set to connect the remote controller (RC) to the shipping (AC).
Connect your phone or tablet to the controller using 1 of these cables that I use and highly recommend. Open the DJI Get 4 app and power on the RC. You will see an "RC connected" message at the bottom of the screen with a greenish low-cal next to information technology. To the right will be an "enter device" prompt, which is the app telling you lot to power on the drone. Go alee and do that and you'll find that the message at present says "connected" with a green light side by side to it. You can now tap on "become fly".
Tapping on "go fly" will take y'all to the camera view of the DJI GO 4 app, which is where nosotros go when we're gear up to become that bird up in the air. This is also where we can brand changes to the camera, gimbal, AC, RC, general settings, and more.
I want to mention that the remainder of this walkthrough will be washed with my Ac powered on as well every bit the RC with my telephone connected to it. Some settings can but exist changed if the everything is powered up, and so I'd recommend you practice the same if you intend to make whatsoever setting adjustments.
Aircraft status
When you first enter the photographic camera view where you'll launch from, an aircraft status screen volition pop up. This screen volition give you general information near the status of your AC. Let'southward get ahead and take a look at it below.
As yous can see in the picture, the aircraft status screen is an overall glance at the drone and its systems. This is where messages will be displayed if there is an error with the IMU, compass, or some other integral component of the operating organization.
You will observe at the top of the image above it says "Normal (Latest Firmware)" to the correct of the "Overall Condition". This is what y'all want to run into before striking that "ten" in the corner to proceed to the camera view.
If y'all see a red triangle like in the pic below, the app is trying to tell you something of import. Tap on that triangle to view the bulletin and follow any prompts the app advises you to take.
Not many settings can be changes in this AC status menu, just we do take a couple of options here. First up is the max flight altitude. You can speedily conform it from this screen past tapping on the box and inputting your desired number. Every bit you may already know, the FAA doesn't desire us drone users to fly above 400 feet (121.92 meters), so continue that in heed when setting your max flight altitude.
Adjacent upwardly is the C1 and C2 button customization. DJI lets you choose from a selection of options for these "hot keys". As y'all can run across above, I take C1 set to "photographic camera forward/down" and C2 set to "narrow sensing (agree)". Merely tap on the blueish writing to change your push button preferences.
The terminal thing we can do on the Ac condition screen is to format the SD bill of fare. This will substantially erase everything that is currently on the SD card, so be sure that media has been backed up before borer on that format push. I wrote an article all about when and how to format the SD card, which I strongly recommend that you check out hither.
Camera view icons
1- Tap hither to takeoff. In improver to pressing upwards on the left stick, you take the option to "slide to takeoff" and the drone will climb to an altitude of well-nigh iv anxiety earlier hovering in place.
2- This volition prompt the RTH and land sequence. Call up that the drone will return to the location where the home point was initially recorded (or last updated).
3- This is the intelligent flight mode carte du jour. Think that you lot demand to be in P-manner to use these.
4- The electric current view is the attitude indicator. The center red icon is the drone and which way it is facing. The little "N" on the left lets you know which manner n is and the blue horizontal line gives you the current pitch and roll of the drone. If I'1000 out flying and I go disoriented, I often glance downward at the attitude indicator and marshal the crimson triangle with the center "H" (my location) in social club to bring the drone my direction.
Tapping on the attitude indicator volition bring up the map view, pictured above. The blue dot is where you are standing with the RC, the red triangle is where the Ac is and the yellowish circle with the "H" is where the electric current home point location is recorded.
five- The "D" stands for distance, and that is how far the drone is from yous, and "H" stands for height, which is the altitude of the drone at any given time. You tin can choose between feet and meters in the settings section, which nosotros'll discuss below. Lastly, this information is gathered using the onboard GPS.
6- "H.S" stands for horizontal speed, which is how fast the drone is traveling parallel with the ground. "V.Southward" stands for vertical speed, which is how fast the drone is ascending or descending.
7- VPS stands for vision positioning system. The tiny photographic camera(s) on the lesser of the drone provide you with altitude telemetry if you lot are low plenty for the VPS to piece of work (typically below 30ft). The distance readings displayed here are strictly obtained by the VPS, whereas the altitude readings in section 5 are gathered via GPS.
8- Here is the box that lets you know what the camera is attempting to focus on. Tap on the screen to change the desired focus point.
9- This is your forwards obstruction avoidance sensors letting you know how far an object is in forepart of y'all. You can run into the dark-green and yellow bars in the image higher up, and as yous get closer to an object the confined will turn cherry-red and the app will showtime beeping at you lot to let you know something is on your path.
10- This is a quick look at your current camera settings. We'll dive deeper into the camera settings in part iii of this
11- This lets you know the video quality you lot volition be recording at and how much remaining capacity is left on the SD bill of fare while recording with your electric current setup.
12- Yous can choose between having a green focus box in the center of the screen and a yellow exposure circle. With the focus box, y'all tin can tap on a particular surface area of the screen to get said area in focus. With the exposure circle, y'all can tap on a detail spot of the screen, and the exposure value of that area is what the drone will fix to neutral. This is beneficial if yous have a lot of uneven lighting in your frame and yous desire to select the EV of a certain spot.
13- Y'all tin can cull between machine-focus and manual focus. Only tap on the area of the screen where you lot desire to photographic camera to focus on. I generally leave this on motorcar unless I'grand attempting to keep something in focus for a long period of fourth dimension while recording and I don't want the image to get blurry as the camera attempts to re-focus periodically. Switching to manual focus would keep the current object in focus for as long as I'm recording.
fourteen- This is the automatic exposure lock. This locks your current exposure value so there isn't the automated variance when switching from low lite to bright environments.
fifteen- This is how yous switch between shooting video and taking pictures.
16- The fiddling dot on the vertical dotted line is the electric current tilt angle of the gimbal. If you get disoriented you tin glance downward to speedily meet where exactly the gimbal has the camera facing.
17- Press here to start and stop
eighteen- This is where you tin can admission the video and photographic camera settings.
19- Go hither to see the images and videos you have taken.
Elevation status bar
Once yous exit the Air conditioning status menu you will be taken to the photographic camera view of Get 4. I'yard going to interruption upward this department into different parts and explicate forth the way why I have certain settings the way they are.
I'll begin by pointing out the icons on the top condition bar and from left to right I'll give a brief description of each. Also included is a picture of what it looks like when you click on the corresponding icon.
Starting with the top left, we take the messages "DJI". Tapping on that will take you lot out of the camera view and dorsum to the equipment tab.
To the right of that, we come to where it says "Ready to Go (GPS)". Borer on this volition accept us to the shipping condition screen that nosotros were greeted with when initially inbound the camera view.
I should note that the dark-green colour shading this box is the color you want to see before taking off. If yous see yellow or scarlet, something is awry and needs your attention. A short description of the issue is sometimes displayed where you currently encounter "Ready to Get (GPS)", but you lot can tap on that box to see detailed instructions on what the app is prompting y'all to do from the AC condition menu.
Primary controller settings
Continuing on to the correct we come to where information technology says "GPS". This is the expanse where yous can chop-chop see what flying mode you are in (P-mode, ATTI, OPTI, or Sport way). Tap here to bring upwards the main controller (MC) settings.
Remote Identification- DJI has created a mode for people to await up the frequency that your RC is emitting to see your flying telemetry and data about y'all and/or your flight. DJI compares this to a car license plate.
There is a spot for y'all to identify yourself, or simply your drone type if y'all prefer the more than private route. You tin also include a description of your current flight (has to be less than 90 characters). There is an choice to completely turn this off if you'd like. Baton Kyle is a YouTuber that discusses this in a video hither.
Home Bespeak Settings- Correctly setting your home indicate is very important. Y'all're going to accept a bad solar day if your drone disconnects from the RC but yous didn't wait for the GPS to acquire your home point before launching. The drone will render to wherever the abode point location was set (if "RTH" was set under the indicate lost setting), and you want that location to be where yous're continuing.
If y'all look to the right of "domicile bespeak settings" y'all'll notice two boxes. Tapping the first box will set the home point to where the drone is currently located. Tapping the 2d box with the piddling guy in it will gear up the home point to the RC location. An example of a fourth dimension where information technology would be smart to set the home indicate to the RC is if y'all launched the drone from a gunkhole that had since drifted a ways away.
Multiple Flying Modes-Each DJI drone has regular flight modes and intelligent flying modes. This setting is giving you the option to switch between regular flight modes. I should mention that not all of DJI's drones have the choice of manually selecting ATTI mode, just y'all can see that I have it every bit an selection because I'm using a P4 Avant-garde for this tutorial.
I wrote an in-depth article about P-mode, ATTI mode, and
Render-to-Home Altitude- If the RTH process is initiated, either past yous manually pressing the button or considering the AC lost signal, the drone will ascend to the altitude you set here earlier it flies dorsum to your location.
If you are flying in an area with a lot of tall trees or structures, set the RTH distance higher than the tallest object. Alternatively, if you are flying in the desert and the RTH altitude is set up to 400 feet, that is overkill and a waste of precious battery life.
Beginner Mode- When you lot are simply learning how to fly a drone, practicing in beginner mode is a good idea. As you can see in the description, your speed will exist restricted and y'all volition simply be able to fly upwards to 30 meters from the home point. This is a good way to minimize the risk associated with existence a new pilot.
Set up Max Flight Distance- I talked about how you lot tin can gear up the max flight altitude in the AC status carte, well y'all can also practice that here. Remember to keep information technology under 400 feet and then when you have that left stick pinned confronting the height of the controller while you're looking at the amazing view from the video feed the drone will end ascending on its own.
Enable Max Distance- If y'all are concerned about flying out a little further than yous'd similar, prepare the max distance and you'll receive an auditory and visual notification letting y'all know that you lot've reached the preset distance.
Chief controller avant-garde settings
Exp, Sensitivity, and Gain- The is where you lot tin can tune the left and right stick on the remote controller to your liking. Getting into the details nigh this is beyond the scope of this post, only y'all can practice configuring these while in an open expanse. I personally don't bear upon these settings.
Reset Proceeds & Expo Tuning- If yous messed with the above settings so much that the drone is interim all kinds of strange, well, just hitting this reset push to bring you dorsum to factory settings.
Sensors- This is an important one and I wish that it wasn't buried under the advanced settings tab. This is where you can meet the status of the IMU and compass on the drone.
At that place are indicators that let you know if the IMU or compass is receiving whatsoever interference and whether or not they need to be calibrated. Bank check out my post about when and how to calibrate the IMU and compass for each DJI drone.
Remote Controller Betoken Lost- If the aircraft disconnects considering of poor bespeak, the drone will commence the sequence that has been preset under this setting. DJI has given us three options: Render-to Domicile (RTH), Landing, and Hover.
I will say that 99% of the time I take mine fix to RTH. So, what is an occasion where yous'd rather accept the landing or hover option selected? When my married woman and I did a route trip across the county I was able to wing my drone quite a fleck. While going through the middle of nowhere (I think in Wyoming) I flew from the rider seat of our machine while my wife collection.
If I would take lost signal while we were moving like that and the signal lost setting was set to RTH, the drone would have flown a couple of miles the opposite direction of the way we were driving. There are another instances that call for landing or hover, but moving locations later
Turn on Head LED's- This gives y'all the pick of turning off the lights on the front of the drone. I by and large get out them on but a fourth dimension where you may desire them off is if you're recording video in a low light environment and the AC'southward lights are in the frame.
Stop Motor Method- DJI gives yous the option to shut off the motors in mid-flight in the
Know that the commands and behaviors vary from drone to drone and then look up this topic in your transmission to see how your particular drone will behave.
Corporeality of satellites
To the right of where the current flying manner is displayed, nosotros can see how many satellites we currently accept. Basically, the more satellites we have the ameliorate the GPS signal, which ways there's less of a gamble nosotros'll lose GPS while flying. Losing GPS while flying will crusade the drone to enter OPTI manner (Vision Position Sensing simply no GPS) or ATTI fashion (no VPS or GPS).
I one time read a DJI rep say that the drone needs more than 6 satellites to marker the dwelling house point, which is a must before launching.
Visual navigation settings
Next, we come to the visual navigation settings. This is where you lot can enable obstacle avoidance, display a radar nautical chart, enable VPS, and more.
Enable Visual Obstacle Abstention- As you can run across in the description, visual obstacle avoidance keeps the drone from running into objects past using its vision sensors. I rarely e'er turn these off. A fourth dimension when yous may desire to switch them off is if yous are flight in P-style shut to the footing and you want to go faster.
Have you ever flown low to the ground in P-mode and thought "why is my drone flying at a snail's pace"? The vision sensors are slowing the drone downward in this situation, so disabling them volition allow the drone to wing at a quicker speed.
Enable Horizontal Obstacle Avoidance in TapFly- If you are in TapFly mode and the drone approaches a giant tree, instead of only stopping in its tracks, the drone should fly around the tree to its correct or left.
Enable Astern Flying- If you are following using ActiveTrack to follow a friend and he/she moves toward the drone, having this box checked volition allow the drone to wing backward.
Sounds cool, correct? Well, you don't have to look far to observe videos of peoples drones flight backward into all kinds of objects because they were using ActiveTrack. Some DJI drones take rear obstruction avoidance, so the risk for those is not near as high as those without the fancy rear sensors. All I tin can say is use caution if y'all enable backward flying!
Enable Obstacle Abstention in ActiveTrack- Having this box checked volition allow the drone to fly horizontally around objects in ActiveTrack. If the drone doesn't recall it tin can make it around the obstruction, it volition only stop and hover.
Display Radar Chart- This will allow lines in the shape of a fractional circle exist displayed on the screen when you lot are approaching an object. The lines volition turn cherry as you get closer to the object. I recommend that you exit this on.
Visual navigation advanced settings
Enable Vision Positioning- Downward vision sensors are a office of what allows your drone to hover so stable above the ground. And then why always turn them off?
Flying over h2o is an example of a time where it may exist wise to disable the vision positioning every bit the downward sensors can go incorrect readings by translucent water or with water that is not calm. Bank check out my mail about whether or not yous should disable the VPS when flight over h2o.
Landing Protection- Have you observe that when you descend, the drone pauses when it gets a couple of anxiety off of the ground? This is the landing protection. If y'all let off the left stick then press downwardly over again, the drone will then proceed to land.
And then why plough landing protection off? If you have ever tried to catch the Mavic and it bounces upward and abroad from you, this is landing protection in action. Disabling landing protection volition allow you to call up the drone from the air without it flight upwardly when your hand gets close. I'd advise leaving this enabled in most circumstances though.
Precision Landing- During an RTH evolution, the drone volition attempt to state in the verbal location the home betoken was initially recorded by using the image information obtained upon takeoff. Beneath is a screenshot of the P4 Pro manual that describes how it works.
I should mention that the newly released Mavic 2 Pro and Zoom practise not have precision landing. I'm not certain why DJI removed this feature from them, but I await forward to conducting my own tests when I can afford to buy one of the new Mavics!
RTH Obstacle Bank check- During an RTH procedure, the drone will automatically climb and fly over obstacles in its path, even if obstacle abstention is disabled.
RTH Remote Obstruction Avoidance- Having this enabled gives the drone permission to alter its course on an RTH flight to avoid obstacles. At that place accept been reports of the setting sun confusing the drone's sensors, causing the OA to be triggered. I haven't (yet) experienced that trouble, and I always leave RTH obstacle check and RTH remote obstruction abstention on.
1 affair that I experience is very important to mention is that the above two settings apply specifically to the RTH process. These preset instructions are crucial, because, what happens when you're flight in
Well, having "RTH obstruction bank check" and "RTH remote obstacle avoidance" toggled on will allow the drone to use obstacle avoidance, even if information technology is flying dwelling in
Remote controller settings
We at present come up to that tiny trivial icon of a remote controller (RC). If you guessed that tapping on this would take you to the RC settings, well then you're a natural born Sherlock.
Remote Controller Calibration- I once had a notification that said my RC needed to exist calibrated. I had no idea how it got de-calibrated (<—is that a word?), but lo and behold I made information technology to this screen and proceeded to calibrate the RC. The on-screen prompts fabricated it a quick and painless process that took just a infinitesimal.
Stick Manner- If you lot've ever played video games, you are probably used to having the option to customize the controls. Refer to the image below to run into what stick options DJI gives us. You can customize your own as well.
Button Customization- In that location's nothing like a adept
Linking Remote Controller- Maybe you lot sent in your Mavic Pro for repairs and they ended upwards sending you a refurbished on. This is where y'all would get to link your RC to the new drone. Follow the on-screen instructions to exercise so.
Remote controller advanced settings
Remote Controller Type- Although I own the Phantom 4 Avant-garde, I tin utilise its controller to fly the Phantom iv Pro or the Phantom 4. You lot can select from compatible options here.
Image transmission settings
To the correct of that we see the letters "Hd". Tap that to pull up the image transmission settings. We tin can choose between motorcar and custom for the channel modes.
If you chose "auto", the RC volition connect to the strongest channel and will switch accordingly as others with stronger signals become bachelor. The channel in blue is the one currently existence used.
Choosing "custom" will give you lot the option to manually chose your channel. As you can see in the image beneath, a drop-downwards tab will appear and yous tin can select the nigh "stable" channel available.
In addition to selecting the channel in custom, you tin besides choose the quality of the transmission video existence displayed on your screen. The lower the number the smoother the video, but information technology won't exist as of high quality. x Mbps will give you meliorate quality video than 4 Mbps, but it may too cause a lot of lag with the video manual.
I'd recommend leaving the channel style selector to "auto" every bit the best available channel will always exist selected automatically. If you see a channel that is very stable and you manually select it, you may have to come back to this setting and change channels if you move locations.
Aircraft battery
Next nosotros take that little battery icon, with a number adjacent to it that is displaying the current battery level of the drone.
Click on the icon to bring up detailed information well-nigh the battery and to make changes to settings.
The Phantom 4 Advanced bombardment is a 4 cell battery, which explains the 4 cylindrical icons at the top. To the right you can see the electric current voltage and temperature of the bombardment.
Critically Low Bombardment Alarm- As you tin meet, I accept the bar set to 10%, which is as low as it can exist set to. What does this mean and what will happen? When the drone's battery is depleted to 10%, y'all volition get a notification and the drone will commence its auto-land sequence. You should have already landed before the drone reached ten%, but if not, you improve be in a prophylactic place as the auto-land cannot exist canceled at this indicate.
Lastly, although I have this set to 10%, the drone knows where it is at and how much battery it needs to descend safely. This ways that the drone may commence its auto-land while I'grand at 15% if I'1000 flight a few hundred anxiety up because the drone knows it needs more juice to descend from the higher altitude.
Low Bombardment Alarm- DJI drones take this set to 30% past default, and I detect it to be a good number. When the bombardment level reaches xxx%, your phone/tablet volition audibly tell you lot that the battery is low and a beeping will commence.
Smart Return-to-Home- Accept y'all e'er wondered what that horizontal line is that runs across the screen in camera view? That is the bar that lets you know how much more flight time you have until the RTH sequence is automatically initiated. The drone knows how much battery it needs to return back to your location. You can cancel the RTH sequence, but use circumspection if you lot choose to wing longer. I always leave this pick on.
Flight Fourth dimension- This gives the flight fourth dimension of your current flight.
Fourth dimension to Discharge- This ane is pretty important. One of the things that can shorten the life of a LiPo battery is to always take it fully charged. To extend battery life, DJI created a feature that will automatically begin to belch the battery after a period of non-utilize.
The default time is ready to x days, only you can change this to match your flying schedule. If you hardly ever fly, I'd recommend setting your time to discharge to ii-3 days as in that location's no reason to let the battery remain at 100% for 10+ days if it's not going to exist used.
The battery will be discharged to well-nigh 50-65% over the course of three days, which is the optimal level for LiPo bombardment storage. I'd recommend that you just charge the batteries halfway before storing them so you don't have to worry about "time to belch" schedules.
Bear witness Voltage on Main Screen- If you'd like to run into the current battery voltage on the main screen, toggle this option on. I have this turned off but information technology would exist helpful if you doubtable that you may accept a worn out or faulty bombardment.
Details- Under the details section you can find information like how many times the bombardment has been charged, what its serial number is and what its production date is.
Gimbal Settings
Here nosotros can brand some adjustments to how our gimbal operates and change settings on speed and sensitivity.
Gimbal Style- Every bit you tin come across, we have the option to put the gimbal in "follow" mode or "FPV" (first person view) mode. For taking pictures/videos and for generally flying, follow manner is recommended as the gimbal volition stay parallel with the ground. FPV mode synchronizes the gimbal with the aircraft, giving you that first-person view feel.
Adjust Gimbal- You tin manually adjust the angle of the gimbal here. Follow the on-screen instructions to complete the process.
Gimbal Auto Calibration- If you observe the gimbal acting funny or if it'south not aligned correct, I'd recommend coming hither to calibrate it before engaging in an email war with DJI.
Configuration 1, 2, and 3- If there is more than than one user for the drone, each tin set and save their gimbal settings. Or if one user uses the drone for multiple purposes, he/she can have the gimbal set for each awarding.
Gimbal Pitch Speed- This is where you control the speed at which the gimbal will tilt up and downwards. If you are using the drone to take video, I'd recommend setting this value at about 10.
Enable Upwards Gimbal Tilt Limit to xxx Degrees- The tilt is express to 30 degrees past default considering the props get in the picture if yous tilt any college. One manner of having a tilt
Gimbal Pitch Smoothness- When y'all tilt the gimbal up and terminate the command, the abruptness of the cease is adamant by the gimbal pitch smoothness. For cinematic videos, I'd recommend having the smoothness gear up to 20-25, which will in effect have the gimbal "coast" to a finish.
Enable Synchronized Gimbal Pan Follow- Y'all know how when the drone is on the ground and you yaw left or correct, the gimbal moves slightly? That is considering this synchronized gimbal pan follow is enabled by default and it is designed to create smoother yaw movements. Some prefer to turn information technology off, but I leave information technology on as I'm comfortable with the default setting.
Reset- Tap this to gear up the gimbal dorsum to factory settings.
General settings
Terminal on the acme status bar is the iii little dots on the very correct. Tap on those 3 dots to bring upwards the general settings menu. This is also where we can admission all of the settings that each of those icons on the status bar takes us to.
I'll go ahead and walk us through each of the general settings line past line and talk about why I have chosen my electric current settings.
Measurement Unit- DJI gives you lot the option to cull from imperial (mph), metric (m/s), and metric (km/h). Living here in the United States I adopt to exit this in imperial, but some of the data provided in DJI's manuals are in meters per second (thou/south), so the option to toggle between them has come in handy on occasion.
Long Press Action- Y'all have the pick to choose between gimbal command and gimbal focus when y'all long press the screen while in camera view. I don't use this much equally I'm used to using the tactile gimbal bike on the RC, but some may find this hand.
Select Live Broadcast Platform- If you would like to live stream your drones video feed, you can select from one of the following platforms to exercise so: YouTube, Facebook,
Evidence Flight Route- If you have this selected, you will encounter a trail of where you lot have flown on that current flight in the map view down at the bottom lefthand corner of the screen.
Calibrate Map Coordinates (For Red china Mainland)- Afterward conducting research most this, I'chiliad sorry to written report that I do not take a definitive respond on this 1. The general consensus is that you practise non demand to have this on if you do not live in people's republic of china. Information technology has something to exercise with the blazon of maps used at that place existence dissimilar.
Cache Map in the Background- This ane is very important if y'all are flying in a remote surface area where you don't have cell reception or you're using a Wi-Fi device (i.e. iPad Mini) to wing the drone. The trivial map on the lesser of the screen will only brandish street names, landmarks, etc. if in that location is an internet connection. If you are still at home but plan to fly in an area that has poor reception, you lot can enshroud the map for that expanse before you leave.
To exercise this, toggle "cache map in the background", render to the camera view and select the map view. Scroll to the place where you plan to fly and zoom in/out until the desired data has been loaded on the screen. This action has buried (saved) the map automatically so when yous are out there without reception, the map will still be displayed.
And so why do I not have this selected on my iPhone? Well, because I generally use my iPhone which is almost always continued to the cyberspace (I alive in a large city with plenty of reception), so I don't want to cache the maps equally it takes up more space and can tiresome down the app. I recommend reading this post on how to stop the video lag in the DJI GO 4 app.
Clear Flight Route- If you have "Show Flight Route" selected in a higher place, all of those lines tin can get a bit messy on your little map. Clearing the flying route erases those lines and allows you to get-go afresh.
Unlocking License- I have talked briefly most the geofenced areas that DJI has placed around certain landmarks and airspace. Sure exceptions apply to the no-wing zone restrictions, and you lot have to request permission from DJI to enter the geofenced airspace. Yous tin can learn more about the request process here. Special temporary licenses that DJI grants y'all can be found under this "Unlocking License" department.
Cache During Video Shooting- If yous have this option checked, a lower resolution video will exist saved to the Go 4 app. This is handy if you lot want to speedily see if what you but shot video of is adequate. I'll discuss how to view that video in a section below. The downside of having this on is that it can play a part in slowing downwardly the app.
Record Audio with Video Enshroud- Although the drone itself does non record audio, the phone/tablet that you are using will and that audio will be played with the lower resolution cached video that is stored on the app (if you have cache video on). I should note that when you transfer the video from the SD bill of fare to your computer, the sound will not be there. I wrote an article here well-nigh recording audio with DJI drones, forth with a few workarounds.
Maximum Video Cache Capacity- Considering storing video cache to the app takes up pregnant space, often resulting in a boring or laggy video transmission, yous can select the maximum amount of video cache you'd like the app to save.
Clear Cache Automatically- If you run out of space on your device, having this option enabled will automatically delete the oldest files so your new ones will be saved. I recommend periodically browsing through the one-time enshroud files on the app so you can delete the ones yous don't desire instead of the app automatically deleting an old file you intended to salvage.
Clear Enshroud Video- This is where you tin delete all of the cached video currently on your app. Remember that this won't delete the original video files, as those are stored on the SD menu. When my DJI Go 4 app is running deadening, this is i of the first things I do in an attempt to speed it up.
Warnings- Whatever warnings the app gives yous will exist saved hither. This comes in handy if you are out flying and something pops up on your screen merely you're too busy trying to not crash you lot Mavic into a tree to see what the notification said. Refer back to this section when y'all are in a condom place to check the warnings.
Clear All Warnings- Well, not much to say hither as it'south pretty self-explanatory. I'd advise immigration them every so often as having warnings from two years agone just takes upward unnecessary space.
Device Proper noun- When you set up your device, the app asked you to proper name the drone. This is where that proper noun is displayed and where yous tin can alter it if you lot'd similar.
Full Screen- The camera view screen tin go cluttered with all of the icons scattered nearly, and DJI lets us temporarily hibernate all of those by either swiping upwardly with one or two fingers on the screen. To go everything back, merely swipe down. This section lets you choose your finger amount preference.
About- This is where yous can find out what firmware version your AC and RC are running and if whatsoever updates are bachelor. You can also find the flight controller and RC's serial number here.
Trevor'south Take
What a long read! Congrats on making it to the stop of a
Click hither to read Part ane of the DJI GO 4 guide.
Click here to read Office 3 of the DJI Get iv guide.
Source: https://www.letusdrone.com/dji-go-4-guide-part-2-of-3-camera-view-drone-settings/
Posted by: perrythout1960.blogspot.com
0 Response to "How To Get An Analogue Camera Signal From A Drone To A Laptop"
Post a Comment